The first element of protection for an R/C vehicle is an effective front bumper. The Losi Micro-T does not have a real front bumper. RPM steps in with our new wide front bumper. Check out this list of cool features:

• Extends 3/8” forward from the front of the chassis, providing serious impact-cushioning and absorbing protection to the tiny and fragile front-end components of these trucks.

• Low-friction skid rails are molded in to the bottom.

• Approximately 25% thicker than the stock skid plate yet still maintains an ultra-slim weight of a mere 2 grams.

• The added thickness of the bumper protects the entire front end of the chassis much better than the stock skid plate, improving overall chassis durability.

• A molded in front cross rib adds rigidity to the bumper while preventing the front hinge pin wire from slipping out.

• A-arm clearance angles are molded in to allow full A-arm droop.

• Deeply countersunk screw holes protect the tiny mounting screws.

• Molded in black from our trademark blend of proprietary materials means superior strength & impact resistance! Our Micro-T bumper will absorb frontal impact energy instead of transferring those forces into the weaker areas of the chassis, preventing or significantly reducing potential internal damage.

73052 Micro-T Wide Front Bumper - Black

Suggested Retail $4.95

Back to Top

Also adapts RPM A-arms to the Losi Muggy
If you're looking for strength and adjustability for your LST2 or Muggy, we've got what you're looking for! The RPM A-arm adapter kit is designed to allow the use of our bulletproof LST A-arms on your LST2 or Muggy. This Adapter kit, combined with a set of RPM Adjustable Camber A-arms for the LST allows any LST2 or Muggy owner the luxury of adjustable camber, not presently available with stock LST2 or Muggy A-arms and provides a level of strength and durability you've always wanted!
This kit consists of sixteen spacers that fit on the outer hinge pins of the A-arm to compensate for the width difference at the outer hinge pin mount.

Tech Notes: RPM recommends this kit be used in conjunction with RPM LST A-arms only. One Adapter Kit will complete one entire truck. RPM LST A-arms sold separately. Some modifications to the axle carriers may be necessary for full suspension travel.

73240

A-arm Adapter Kit for the Losi LST2

Suggested Retail $4.95

Back to Top

also fits Losi LST2 Mach 427 Engine Heads

The RPM Head Guard for the Losi LST Mach .26 & LST2 Mach 427 engine head is nearly 5/16” thick adding serious skid and impact resistance to the fragile cooling fins of the stock Losi LST Mach .26 / LST2 Mach 427 engine heads. Additionally, the RPM LST / LST2 Head Guard has a uniquely designed positive lock that won’t allow the Head Guard to pull free during a crash.

The RPM LST / LST2 Head Guard is designed specifically for the Losi LST Mach .26 & LST2 Mach 427 stock engine heads and comes with mounting screws and complete installation instructions. They are molded in our trademark blend of bulletproof nylons for strength and durability unmatched by any other material on the market!

Tech Note: The RPM Head Guard has only been tested and guaranteed to fit stock Losi LST Mach .26 & LST2 Mach 427 engine heads.

73252	Losi LST / LST2 Head Guard - Black
73255	Losi LST / LST2 Head Guard - Blue

Suggested Retail $4.95

Back to Top

(Also fits the Losi LST2)

Click image for a larger view or click here.

Our Gear Cover for the Losi LST & LST2 is a two-piece, original design from RPM. The backing plate is the foundation of our new gear cover. It bolts in place of the stock gear cover using the two stock mounting screws. The backing plate protects the chassis side of the pinion and spur gears while a series of ribs that rest against the chassis plate add significant support to the RPM gear cover. Additionally, the backing plate remains in place, even while the gear cover, spur, and pinion gears are removed during maintenance.

Three new screws and a hex nut are included with the gear cover assembly allowing the gear cover to bolt up to the RPM backing plate. The three new mounting locations provide the best possible support and helps seal the gear cover to the backing plate. The RPM gear cover has ample room to fit almost any combination of gears without clearance issues. In addition, we package our trademark soft plug in with each gear cover assembly which provides much easier access to the slipper clutch adjustment nut than the stock gear cover.

RPM LST / LST2 gear covers are molded in our trademark blend of indestructible nylons and are sold in either blue or black to compliment or contrast any paint or chassis color scheme.

Tech Note: RPM has tested the fit of our LST / LST2 Gear Cover and Backing Plate on a stock LST and LST2 only. Therefore, we can only guarantee the fit of these parts when used in conjunction with stock parts.

Suggested Retail $11.95

Back to Top

(LST2 & Muggy owners - see tech note below)
Camber is one of the most critical adjustments on a monster truck. The stock camber angles on the LST is set at zero degrees and the A-arms do NOT allow adjustability. RPM upper A-arms for the LST incorporate a tough 303 series stainless steel camber rod to create an adjustable camber RPM A-arm. We’ve included the anti-sway bar mount in the stock location as well. The lower A-arm is beefed up to take some serious abuse while maintaining stock shock mounts. RPM is the only answer for rugged, rigid, durable, and adjustable performance that works.

RPM LST A-arms are only sold in sets, and include one upper A-arm assembly (consisting of both upper A-arm sections and the connecting 303 stainless steel camber rod) and one lower A-arm. These A-arms are available in either blue or black and are molded from our bulletproof blend of nylons for the ultimate in rigidity, strength and durability.

Additional Help: Please refer to our FAQ page for information on setting up the adjustable camber upper a-arm and camber rod for the maximum amount of negative camber adjustment.

Suggested Retail Price
$14.95 / set A-arms
$9.00 / pair replacement camber rods

Back to Top